Sidebar
OBD2 Categories
Recent Articles
-
How to Flash Autel Maxisys Ultra? October 16, 2024
-
How to Upload Vehicle Logs on Autel KM100? September 14, 2024
-
Autel Autolink AL519 VS Autel AL619 - Review September 13, 2024
New Releases
How to Flash Autel Maxisys Ultra?
on
0 comments
How to Flash Autel Maxisys Ultra
Preparation:
Prepare an 8GB TF CARD in FAT32 format. (Must be 8GB)
Unzip “dv2141” zip file and Copy the dv2141 folder to the TF card.
- Insert the TF card into the tablet, then restart the tablet, and it will automatically upgrade.
- After the upgrade is completed, a solid color background will be displayed. (A green background indicates a successful upgrade, and a red background indicates a failed upgrade.)
- After the upgrade is successful, it will automatically restart after pulling out the TF card.
Note:
- Before upgrading, make sure the battery power is not less than 20% when not charging and not less than 15% when charging. If the power is lower than this, the upgrade failure will be displayed.
- This flash will not reset to factory default.
How to Get the “dv2141” Zip File?
Please contact sales@diagmart.com and describe your request. We will send the file to you.
Best Sellers
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal
Black Friday Deal